MXP35 planar non inductive medium power resistor, TO-220 package 35W power patent ZL200830102946.4 specially designed molded packaging structure, small volume, high power, thick film non inductive, in line with VDE0160 and UL94-V0 standards. Technical characteristics The center temperature of the base plate is ≤ 25 ° C, and the rated power is 35W. The standard TO-220 is molded and packaged, and the French blue base plate is installed. The base plate is fixed by an M3 screw to the conductive part and the metal base plate in a standard lead form for insulation, which is easy to install. The resistance package is completely insulated with the heat sink. See "EBG Power Resistor Pulse Electrical Load Characteristics" for pulse load capacity. Specification parameter resistance value range: 0.2 Ω ～ 1M Ω Resistance value accuracy: ± 1% ～ ± 10% (± 0.5% can be produced as required) Temperature coefficient: it is better to achieve ± 50ppm/° C (25 ° C ～ 105 ° C) 25 ° C rated power 35W, maximum working voltage 350VDC. Dielectric withstand voltage: 1800VAC insulation resistance value: minimum 10G Ω instantaneous overload: 2 times rated power, but not more than 1.5 times maximum continuous working voltage, for 5 seconds, Δ R≤(0.3%R+0.001Ω)。 Service life: rated power 2000 hours, MIL – R – 39009D Δ R≤±(1.0%R+0.001Ω)。 Humidity resistance: MIL – Std – 202, Method 106, Δ R≤±(0.5%R+0.001Ω)。 Thermal shock: MIL – Std – 202, Method 107, Condition F, Δ R≤±(0.3%R+0.001Ω)。 Lead out end strength: MIL – Std – 202, method 211, condition A, tensile test 2.4 N, Δ R≤±(0.2%R+0.001Ω)。 High frequency vibration: MIL – Std – 202, Method 204, Condition D, Δ R≤±(0.2%R+0.001Ω)。 Operating temperature range: - 55 ° C~+175 ° C Lead material: anti-oxidation tinned copper wire M3 screw Maximum torque: 0.9Nm Size and structure form Size Min (mm) Max (mm) A12.7014.70B14.5015.00C9.9110.41D3.553.75E5.856.35F2.853.05G1.171.37H ---- 4.00J0.700.86L4.835.33M4.064.82N1.201.40Q0.550.70R2.052.25 Power reduction curve Note: 1 The slope of the power reduction curve (thermal resistance): 0.23W/° K (4.28 ° K/W). See the "Heat Dissipation Requirements for EBG Power Resistor System" for the description. 2. The rated power of MXP35 is 2.50W at room temperature of 25 ° C without the use of heat sink. If the temperature is higher than 25 ° C, the power will be reduced by 0.02W/° K.